Two-chamber firewood drying kiln E171/70m3

€ 59 900

Wood dryer technical parameters for each chamber:

Inner dimensions: Width 6.60m; * Depth 9.00m; * Height 2.60m;
Dryer foundations: Not included
Heating power input: 250 KW (for each chamber) / 500 KW - for both
Spray system: None
Fans 4 pc, 4 KW
Number of chimneys: (3 + 3) 500mm
Management system: Yes, Computer interface
Operating voltage: 400 V - 50 Hz

Ø Columns: made of special rectangular profiles, which are durable structural bearing supports;

Ø Beams: made of special rectangular profiles with elongated profile height to provide load bearing capacity for structural loads;

Ø Interior: coated with specially-formed "C" type sheets, which ensures a good drying seal;

Ø Isolation: stone wool with a low thermal conductivity W / m2K - 0.035 W / mK is used. Wall insulation thickness 200mm. Thermal insulation from the external environment is protected by a windproof, waterproofing and anticondensate membrane.

Ø Interior: Aluminum;

Roofing: It is lined with specially designed "C" type sheets. For thermal insulation, rock wool is used with a low thermal conductivity coefficient W / m2K - 0.035 W / mK, thickness 200 mm. Thermal insulation from the external environment is protected by a windproof, waterproofing and anticondensate membrane. Roofing - Galvanized trapezoidal profile.

Doors: Sliding with a common mechanism + 1 inspection door for each room. We use a specially designed aluminum profile for the door frame, which ensures the stability of the door and the airtightness of the structure itself. Made from aluminum and filled with a 200mm thick mineral wool thermal insulation layer with a low thermal conductivity of W / m2K - 0.037.

Back